Contact us:
(931) 295-9009
Dailey's Farm & Walk-Behind Tractors
Click on an image for larger photo
PRICING:
NOTES:
Our largest and heaviest duty tractor, specifically designed for heavy duty use with demanding soil-working implements…transmission and clutch on this machine are about 30% heavier-duty than on the largest model BCS imports into North America. The heavy-duty handlebars and robust transmission design make this our best tractor to run the reciprocating spader implement, and it is good for any commercial application where mainly rear-PTO (soil-working) implements are used. Negatives on this model are: slightly harder maneuvering due to more weight and bulk; Limited speeds for mowing/front-PTO implements; NO quick-coupling system available for changing implements on this model; and when converting this tractor to front-PTO mode, gearshift levers must be changed (On this model, figure 10 minutes to change between Rear-PTO and Front-PTO modes…all our other models convert in a minute or two) Another potential down-side for mowing applications is that the steering-brake controls are located at the top of the handlebar column, rather than at the hand-grips like other tractor models. One unique feature is that the G131 also has a Synchronized PTO option available to operate a “driven-wheel trailer”, which turns this machine into a 4-wheel drive “truck” with a dump bed, capable of hauling 2000 pounds.
(Closest comparable BCS model is 750 [formerly 948], but 750 has lighter transmission)
Engine options: | 16 HP Briggs Vanguard 2-cylinder gas |
Starting System: | Electric start with recoil back-up |
Clutch: | “Active” Automotive type, flat plate, serviceable |
Transmission: | All hardened steel gears and shafts supported by ball bearings in oil bath; with ‘freewheeling’ feature (for ease of moving tractor when engine not running) |
Differential: | Standard, lockable |
Steering Brakes: | Standard, controls at top of handle column |
Wheel Speeds: | 4 Fwd. working speeds & 2 Rev. in Rear-PTO mode; 2 Fwd. working speeds & 2 Rev. in Front-PTO mode; + Transport speed in Rear-PTO mode |
Rear PTO (tilling) mode: | Fwd: .7 mph, 1.5 mph, 2.2 mph, 4.4 mph, 9.0 mph Rev: 1.25 mph, 2.5 mph |
Front PTO (mowing) mode: | Fwd: 1.25 mph, 2.5 mph Rev: .7 mph, 2.2 mph |
Safety Features: | Operator Presence Control (deadman switch), reverse gear/PTO lockout (to prevent tilling in reverse) |
Handlebars: | Instantly adjustable up and down and side-to-side, completely reversible to convert to front- PTO mode (requires different gearshift levers). |
PTO Type: | Independent, 1233 rpm at maximum engine speed. Synchronized PTO kit available to power driven-wheel utility trailer. |
Method of changing implements: | Two 14mm threaded studs and nuts; no quick coupling available |
Standard Wheel Size: | 6.5/8”x12”x23” tractor tread, adjustable track width, tube type. Foam-filled option available |
Standard outside wheel track (w/o accessories): | 26 or 32 inches |
Tractor Weight (w/o implements): | Gas: 350 lbs |